Service 02 / 10
ACP & LED Signage in Siliguri & North Bengal
Clean, durable faces for modern brands
Aluminium Composite Panel (ACP) cladding combined with LED module lighting creates the clean, premium look demanded by banks, telecom showrooms, and retail chains. We cut, route, and bond ACP to precise dimensions, then back-light or face-light with uniform LED modules. The result is a sign that reads well at distance and retains its finish through years of sun and rain.
What is ACP signage?
ACP signage uses aluminium composite panels as a clean, weather-resistant sign face or shopfront cladding, finished with acrylic or metal 3D letters lit by LED modules. AD JEET cuts, routes and fits ACP sign boards and 3D LED letter signs from its Siliguri workshop for showrooms, dealerships, banks and branded outlets.
Also known as: ACP sign board, 3D LED letter sign, ACP facade cladding, ACP elevation signage, Acrylic 3D letters.
Page reviewed
Siliguri brief
Planning ACP and LED signage in Siliguri
Planning a complete shopfront finish in Siliguri? An ACP fascia and LED lettering need to be considered together with the entrance and existing building. Share a photo of the whole frontage and mark shutters, pillars, doors and lighting you want to keep. Include approximate dimensions if known, plus your logo or brand requirements. Tell us what needs removing or reusing so the panel layout, lettering, electrical work and fitting scope can be clarified before the quote.
Send us
- A photo of the whole frontage, marked up
- Approximate dimensions, if known
- Your logo or brand requirements
- What should be removed or reused
- A location pin
Also for nearby Matigara, Bagdogra and Naxalbari.
Compare / Shopfront boards
Glow sign board, ACP board or flex?
Three common ways to put a name on a shopfront, all made at AD JEET's Siliguri workshop. A glow sign board lights its whole face from inside a box. An ACP board carries separate 3D letters lit from inside or behind. A flex board is a printed sheet, usually unlit, and the quickest of the three to make.
| Board | How it is lit | What it is made of | Often chosen for | Planning lead time |
|---|---|---|---|---|
| Glow sign board | LEDs inside a box light the whole face | A printed flex, acrylic or ACP face on a metal frame | Shops, clinics and offices, often a single shopfront | 5–7 working days |
| ACP board with 3D LED letters | LEDs inside the letters, or behind them for a halo | An aluminium composite panel with acrylic or metal 3D letters | Showrooms, dealerships, banks and brand outlets | 7–10 working days |
| Flex board or banner | Usually unlit, or lit from the front | Printed PVC flex, finished with eyelets, hemming or a frame | Short-term or low-budget signs, banners and hoardings | 1–3 working days |
Lead times are planning estimates, counted once the artwork and size are approved. Each board is quoted by area in square feet, then adjusted for the material, lighting, artwork, quantity and installation access.
Spec sheet: ACP & LED Signage
Materials
- ACP sheet (grade agreed per project)
- LED modules
- Aluminium extrusion
- PVC flex backing
- Stainless steel fixings
Sizes / Formats
- Custom sizing from 2 sq ft to full building facade
Turnaround
7–10 working days
Planning estimate. Confirm your schedule before ordering.
ACP & LED Signage: 5 project photos
Open in the portfolio ↗Tanyamakeovers · Siliguri · 2026
ACC · Dalkhola
Anchor by Panasonic · Bhutan
Ambuja Cement · Kushmandi
Supreme Pipe · Raiganj
Your questions about ACP & LED Signage.
Can you make 3D LED letters for a shop or showroom?
Yes. 3D letters can be made in acrylic or metal and lit from inside or from behind for a halo effect, then fixed to an ACP panel or directly to the wall. Share your logo file, the frontage width and a photo so the letter height and lighting can be planned.
How is an ACP sign board priced?
An ACP board is quoted on the panel area, the frame or sub-structure, the letters and logo, the lighting and the installation access. Brand outlets with a design manual should share it with the site photographs so the quote reflects the approved materials.
Which ACP brands do you work with?
The ACP brand, grade, finish and intended use should be agreed for your project. Send any brand specifications with your brief so the team can confirm availability and quote the appropriate panel.
Can you match a brand's exact Pantone colour?
Yes. We use UV-stable vinyl wrap or powder-coated finishes to match brand colour standards provided by your agency.
Is ACP signage suitable for the Darjeeling hill area?
Yes, with appropriate weather-sealed fixings and stainless hardware to handle humidity and temperature swings at altitude.
Beyond the workshop town
Working outside Siliguri?
Everything is made at the Siliguri workshop and installed on site across North Bengal and Sikkim. The areas page has the distance to every place we cover and what helps us plan a job there.
What are we putting
your name on?
A photo. A place. An idea.
Send what you have. We'll take it from there.
Send the brief
Or send the brief here.
ACP & LED Signage and Siliguri are filled in already. Change the town if your site is elsewhere.
Prefer WhatsApp? Send it there ↗